Subaru Legacy: Auto-dimming function - Type B inside mirror (if equipped) - Mirrors - Instruments and controls - Subaru Legacy Owners ManualSubaru Legacy: Auto-dimming function

The auto-dimming function is an anti-glare capability which automatically reduces glare coming from headlights of vehicles behind you.

By pressing the power button, the autodimming function is toggled on or off.

When the auto-dimming function is on, the function indicator will illuminate in green. Even with the mirror in anti-glare mode, the mirror surface turns bright if the transmission is shifted into the “R” (reverse) position. This is to ensure good rearward visibility during reversing.

The mirror has a photosensor attached on both the front and back sides. During

The mirror has a photosensor attached on both the front and back sides. During nighttime driving, these sensors detect distracting glare from vehicle headlights behind you and automatically dim the mirror to eliminate glare and preserve your vision. For this reason, use care not to cover the sensors with stickers, or other similar items. Periodically wipe the sensors clean using a piece of dry soft cotton cloth or an applicator.

NOTE

When cleaning the mirror, use a paper towel or similar item dampened with glass cleaner. Do not spray glass cleaner directly on the mirror surface. By doing so, the sprayed glass cleaner could enter the inside of the mirror housing. That may cause a malfunction in the mirror.

    Type B inside mirror (if equipped)
    1) Electronic compass display 2) Rear view image display 3) HomeLink® button 1 4) HomeLink® button 2 5) Function indicator 6) HomeLink® button 3 7) Photosensor 8) Power button 9) Compass ...

    Rear view image display
    When the ignition switch is in the “ON” position and the transmission is in the “R” (reverse) position, the rear view camera automatically displays the rear view image behind the vehicle o ...

    See also:

    Activating and deactivating the alarm system
    To change the setting of your vehicle’s alarm system for activation or deactivation, do the following. 1. Disarm the alarm system. Refer to “Disarming the system” F2-18. 2. Sit in the driver ...

    Notes on Emergency Requests
    Do not use the voice activation system to initiate an Emergency Request. In stressful situations, the voice and vocal pitch can change. This can unnecessarily delay the establishment of a teleph ...

    Passenger compartment area
    1) Lower anchorages for child restraint system (page 1-33) 2) Seatbelt (page 1-12) 3) Center console (page 6-6) 4) Front seat (page 1-2) 5) Rear seat (page 1-7) 1) Top tether anchorages (page ...