Nissan Maxima: Automatic operation (if so equipped)
Tilt operation
Push the switch (1) up or down to adjust the steering wheel to the desired position.
Entry/Exit function
The automatic drive positioner system will make the steering wheel move up automatically when the drivers door is opened and the ignition switch is in the LOCK position. This lets the driver get into and out of the seat more easily. The steering wheel moves back into position when the drivers door is closed and the ignition switch is pushed.
For more information, see Automatic drive positioner in this section.
Telescopic operation
Push the switch (1) forward or backward to adjust the steering wheel to the desired position.
Tilt/telescopic steering
WARNING:
Do not adjust the steering wheel while driving. You could lose control of your
vehicle and cause an accident.
CAUTION:
Do not adjust the steering wheel any closer to you than is necessar ...
Manual operation (if so equipped)
Tilt and telescopic
operation
Pull the lock lever (1) all the way towards you:
- Adjust the steering wheel forward or backward in direction (2)- to the desired
position.
- Adjust the st ...
See also:
Vehicle Dynamics Control OFF indicator light
The light illuminates when the ignition switch is turned to the “ON” position
and turns off after approximately 2 seconds. The light illuminates when the Vehicle
Dynamics Control OFF switch ...
Roof carrier
Important safety notes
WARNING
Only use roof racks approved by Mercedes-
Benz for your vehicle model to avoid damage
to the vehicle.
Follow the manufacturer's installation
instructions. O ...
Scanning
SCAN automatically searches through the list of satellite channels. The search
will only be carried out in the selected category, see page 214 for more detailed
information on the scan function. ...
