Nissan Altima: CD care and cleaning - Audio system (if so equipped) - Monitor, climate, audio, phone and voice recognition systems - Nissan Altima Owners ManualNissan Altima: CD care and cleaning

● Handle a CD by its edges. Do not bend the

● Handle a CD by its edges. Do not bend the disc. Never touch the surface of the disc.

● Always place the discs in the storage case when they are not being used.

● To clean a disc, wipe the surface from the center to the outer edge using a clean, soft cloth. Do not wipe the disc using a circular motion.

● Do not use a conventional record cleaner or alcohol intended for industrial use.

● A new disc may be rough on the inner and outer edges. Remove the rough edges by rubbing the inner and outer edges with the side of a pen or pencil as illustrated.

Type A

Type A

1. Source select and Power on switch
2. Tuning switch
3. Volume control switch

Type B

Type B

1. Source select and Power on switch
2. Tuning switch
3. Volume control switch

Type C

Type C

1. Source select and Power on switch
2. Menu control switch/ENTER button
3. Volume control switch

    Playing a DVD
    Inserting/Ejecting the DVD The CD/DVD insert slot is located behind the display screen. To insert the DVD, press the OPEN/TILT button on the audio unit. The display screen will automatically mov ...

    Antenna
    ...

    See also:

    Functional requirements
    The system must have been initialized when the tire inflation pressure was correct; otherwise, reliable signaling of a flat tire is not ensured. Initialize the system after each correction of th ...

    Cleaning interior
    Occasionally remove loose dust from the interior trim, plastic parts and seats using a vacuum cleaner or soft bristled brush. Wipe the vinyl and leather surfaces with a clean, soft cloth dampened ...

    To set cruise control speed
    1. Push the cruise ON-OFF button on the steering wheel to turn the system on. The CRUISE indicator light in the instrument cluster will illuminate. 2. Accelerate to the desired speed, which must be ...