Toyota Camry: Changing “ENGINE START STOP” switch modes - Engine (ignition) switch (vehicles with a smart key system) - Driving procedures - When driving - Toyota Camry Owners ManualToyota Camry: Changing “ENGINE START STOP” switch modes

Modes can be changed by pressing the “ENGINE START STOP” switch with brake pedal released. (The mode changes each time the switch is pressed.)

Off*

Off*

The emergency flashers can be used.

The smart key system indicator light (green) off.

ACCESSORY mode

Some electrical components such as the audio system can be used.

The smart key system indicator light (green) flashes slowly.

IGNITION ON mode

All electrical components can be used.

The smart key system indicator light (green) flashes slowly.

*: If the shift lever is in a position other than P when turning off the engine, the “ENGINE START STOP” switch will be turned to ACCESSORY mode, not to off.

    Stopping the engine
    Stop the vehicle. Shift the shift lever to P. Set the parking brake. Release the brake pedal. Press the “ENGINE START STOP” switch. Check that the smart key system indicator light (gr ...

    When stopping the engine with the shift lever in a position other than P
    If the engine is stopped with the shift lever in a position other than P, the “ENGINE START STOP” switch will not be turned off but instead be turned to ACCESSORY mode. Perform the following p ...

    See also:

    Scheduled maintenance service
    Follow Normal Maintenance Schedule if the vehicle is usually operated where none of the following conditions apply. If any of the following conditions apply, follow Maintenance Under Severe Usage ...

    Operating Instructions - Radio Mode
    NOTE: The ignition switch must be in the ON or ACC position to operate the radio. Power Switch/Volume Control (Rotary) Push the ON/VOLUME control knob to turn on the radio. Press the ON/VOLUME ...

    DRIVE 3
    This range eliminates shifts into fourth gear. The transmission will operate normally in first and second gear. Shifts into third may be delayed to provide second gear operation at higher speeds. ...