Subaru Legacy: Check the fluid level monthly. - Checking the fluid level - Automatic transmission fluid - Maintenance and service - Subaru Legacy Owners ManualSubaru Legacy: Check the fluid level monthly.

1. Drive the vehicle several miles to raise the temperature of the transmission fluid up to normal operating temperature; 158 to 1768F (70 to 808C) is normal.

2. Park the vehicle on a level surface and set the parking brake.

3. First shift the select lever in each position. Then shift it in the “P” position, and run the engine at idling speed.

1) Yellow handle

1) Yellow handle

1) HOT range

1) HOT range
2) COLD range
3) Upper level
4) Lower level

4. Pull out the level gauge and check the fluid level on the gauge. If it is below the lower level on the “HOT” range, add the recommended automatic transmission fluid up to the upper level.

    Checking the fluid level
    The automatic transmission fluid expands largely as its temperature rises; the fluid level differs according to fluid temperature. Therefore, there are two different scales for checking the level ...

    Checking the fluid level when the fluid is cold
    When the fluid level has to be checked without time to warm up the automatic transmission, check to see that the fluid level is between the lower level and upper level on the “COLD” range. If ...

    See also:

    Outside Canada
    Government regulations in Canada require that automobiles meet specific emission regulations and safety regulations. Therefore, vehicles built for use in Canada may differ from those sold in other ...

    Heated and Ventilated Seats
    Heated and Ventilated Seat Buttons Shown, Heated Seat Buttons Similar If available, the buttons are on the climate control panel. To operate, the ignition must be on. Press to heat the seat c ...

    Scrapping of your Toyota
    The SRS airbag and seat belt pretensioner devices in your Toyota contain explosive chemicals. If the vehicle is scrapped with the airbags and seat belt pretensioners left as they are, this may cau ...