Nissan Altima: Compact disc (CD) player operation
Place the ignition switch in the ACC or ON position, and carefully insert the compact disc into the slot with the label side up. The compact disc is automatically pulled into the slot and starts to play.
If the radio is already operating, it automatically turns off and the compact disc begins to play.
CD button:
When the CD button is pressed with a compact disc loaded and the radio playing, the radio turns off and the last used compact disc starts to play.
TUNE/FF·REW (Fast Forward, Rewind) button:
When the TUNE/FF·REW button or is pressed while the compact disc is playing, the compact disc plays at an increased speed while fast forwarding or rewinding. When the button is released, the compact disc returns to normal play speed.
SEEK/TRACK button:
When is pressed while the compact disc is playing, the next track following the present one starts to play from the beginning. Press several times to skip several tracks.
Each time the button is pressed, the CD advances 1 additional track. The track number appears in the display window. (When the last track on the compact disc is skipped, the first track is played.)
When is pressed, the track being played returns to the beginning. Press several times to skip back several tracks. Each time the button is pressed the CD moves back 1 track.
pause/mute button:
To pause the sound while a CD is playing, press the pause/mute button. “Pause” is shown on the display. Press the button again to resume playing the CD.
RDM/RPT button:
When the RDM/RPT button is pressed while the compact disc is being played, the play pattern can be changed as follows:
Random Disc ←→ Repeat Track ←→ Normal
Random Disc: The order of the tracks on the disc will be mixed during play.
Repeat Track: The track that is currently playing will be repeated.
SCAN (CDs) button:
Press the SCAN button less than 1.5 seconds to scan all tracks of the current disc for 10 seconds per track. The SCAN icon is flashed during scan mode.
The scan mode is canceled once it scans through all tracks on the disc, or if the SCAN button is pressed during scan mode.
CD EJECT:
When the button is pressed with a compact disc loaded, the compact disc will be ejected.
When the button is pressed while the compact disc is playing, the compact disc will eject and the system will turn off.
CD IN indicator:
A CD icon indicator appears on the display when a CD is loaded with the system on.
AUX (Auxiliary) button:
The AUX IN jack is located on the CD player. The AUX IN audio input jack accepts any standard analog audio input such as from a portable cassette tape/CD player, MP3 player or laptop computers.
Press the AUX button to play a compatible device when it is plugged into the AUX IN jack.
FM/AM radio operation
FM/AM band select: Pressing the RADIO button will change the band as follows: AM ←→ FM When the RADIO button is pressed while the ignition switch is in the ACC or ON position, the ra ...See also:
Voice Pass-Thru
Voice pass-thru allows access to the voice recognition commands on the cell phone. See the cell phone manufacturer's user guide to see if the cell phone supports this feature.
To access contacts stor ...
Actions in the event of a flat tire
Normal tires
1. Identify the damaged tire.
Do this by checking the air pressure in all
four tires.
If the tire inflation pressure in all four tires is
correct, the Tire Pressure Monitor may not ...
Electrical Power Outlets
There are two 12 Volt (13 Amp) electrical power outlets
on this vehicle. Both of the power outlets are protected by
a fuse.
The instrument panel power outlet, located below the
climate control ...