Chrysler 200: Controlling The iPod Or External USB Device Using Radio Buttons - iPod /USB/MP3 Control — If Equipped - Understanding your instrument panel - Chrysler 200 Owners ManualChrysler 200: Controlling The iPod Or External USB Device Using Radio Buttons

Chrysler 200 / Chrysler 200 Owners Manual / Understanding your instrument panel / iPod /USB/MP3 Control — If Equipped / Controlling The iPod Or External USB Device Using Radio Buttons

To get into the iPod /USB/MP3 control mode and access a connected audio device, either press the “AUX” button on the radio faceplate or press the VR button and say USB or Switch to USB . Once in the iPod /USB/MP3 control mode, audio tracks (if available from audio device) start playing over the vehicle’s audio system.

    Using This Feature
    By using iPod cable or external USB device to connect to USB port: • The audio device can be played on the vehicle’s sound system, providing metadata (artist, track title, album, etc.) info ...

    Play Mode
    When switched to iPod /USB/MP3 control mode, the iPod or external USB device automatically starts Play mode. In Play mode, the following buttons on the radio faceplate may be used to control the ...

    See also:

    Auto power off function
    If the vehicle is left in ACCESSORY mode for more than 20 minutes or IGNITION ON mode (the engine is not running) for more than an hour with the shift lever in P, the “ENGINE START STOP” switc ...

    Programming HomeLink
    1. To begin, press and hold the two outer HomeLink buttons (to clear the memory) until the indicator light 1 blinks (after 20 seconds). Release both buttons. 2. Position the end of the hand-held ...

    Shifting Into Park
    WARNING! It can be dangerous to get out of the vehicle if the shift lever is not fully in P (Park) with the parking brake firmly set. The vehicle can roll. If you have left the engine runni ...