Volvo S60: Coolant - Fluids - Maintenance and specifications - Volvo S60 Owners ManualVolvo S60: Coolant

Location of the coolant reservoir

Location of the coolant reservoir

Normally, the coolant does not need to be changed. If the system must be drained, consult a trained and qualified Volvo service technician.

See page 341 for information on cooling system capacities.

CAUTION

  • If necessary, top up the cooling system with Volvo Genuine Coolant/Antifreeze only (a 50/50 mix of water and antifreeze).
  • Different types of antifreeze/coolant may not be mixed.
  • If the cooling system is drained, it should be flushed with clean water or premixed anti-freeze before it is refilled with the correct mixture of water/antifreeze.
  • The cooling system must always be kept filled to the correct level, and the level must be between the MIN and MAX marks. If it is not kept filled, there can be high local temperatures in the engine which could result in damage. Check coolant regularly!
  • Do not top up with water only. This reduces the rust-protective and antifreeze qualities of the coolant and has a lower boiling point. It can also cause damage to the cooling system if it should freeze.
  • Do not use chlorinated tap water in the vehicle's cooling system.

WARNING WARNING

  • Never remove the expansion tank cap while the engine is warm. Wait until the engine cools.
  • If it is necessary to top off the coolant when the engine is warm, unscrew the expansion tank cap slowly so that the overpressure dissipates.
    Fluids
    ...

    Brake fluid
    Location of the brake fluid reservoir Checking the level The fluid reservoir is concealed under the round cover at the rear of the engine compartment. The round cover must be removed first befor ...

    See also:

    Driving assist systems
    To help enhance driving safety and performance, the following systems operate automatically in response to various driving situations. Be aware, however, that these systems are supplementary and ...

    Seat Belts
    Inspect the belt system periodically, checking for cuts, frays, and loose parts. Damaged parts must be replaced immediately. Do not disassemble or modify the system. Front seat belt assemblies mu ...

    Child restraint registration and recalls
    Registering a child restraint Child restraints could be recalled for safety reasons. You must register your child restraint to be reached in a recall. To stay informed about child safety seat rec ...