Subaru Legacy: Cooling or dehumidifying
For cooling and dehumidification of the passenger compartment, air flows through
the instrument panel outlets:
1. Set the air inlet selection button to the OFF position.
2. Press the “” button.
3. Set the air conditioner button to the “ON” position.
4. Set the temperature control dial to the blue side.
5. Set the fan speed control dial at the desired speed.
Defrosting or defogging
To direct warm air to the windshield and front door windows: 1. Press the “” button. 2. Set the temperature control dial to the red side. 3. Set the fan speed control dial at the highest speed. ...See also:
Displaying contacts
General information
1. "Office"
2. "Contacts"
All contacts are listed in alphabetical order. Depending
on the number of contacts, an A-Z
search is offered.
A symbol indic ...
Clearing the programmed information
Individual buttons cannot be cleared. However, to clear all programming, press
and hold the two outside buttons and release when the indicator light begins to
flash (approximately 20 seconds). ...
Exhaust pipe and muffler
Visually inspect the exhaust pipes, muffler and hangers for cracks, deterioration,
or damage. Start the engine and listen carefully for any exhaust gas leakage. Tighten
connections or replace part ...