Subaru Legacy: Disarming the system - Alarm system - Keys and doors - Subaru Legacy Owners ManualSubaru Legacy: Disarming the system

Briefly press the “less than 2 seconds) on the remote transmitter. The driver’s door will unlock, an” button (for less than 2 seconds) on the remote transmitter. The driver’s door will unlock, an electronic chirp will sound twice, the turn signal lights will flash twice and the security indicator light will turn off.

To unlock all other doors and the rear gate (Outback), briefly press the “button a second time within 5 seconds.” button a second time within 5 seconds.

To arm the system using power door locking switch
1. Close all windows. 2. Remove the key from the ignition switch. 3. Open the doors and get out of the vehicle. 4. Make sure that the engine hood is locked. 5. Close the doors (and the rear gate ( ...

Emergency disarming
If you cannot disarm the system using the transmitter (i.e. the transmitter is lost, broken or the transmitter battery is too weak), you can disarm the system without using the transmitter. The s ...

See also:

Uconnect™ Phone — If Equipped
Uconnect™ Phone is a voice-activated, hands-free, invehicle communications system. Uconnect™ Phone allows you to dial a phone number with your mobile phone using simple voice commands (e.g., ...

Lane Departure Warning (LDW)– introduction
This function is designed to help reduce the risk of accidents in situations where the vehicle leaves its lane and there is a risk of driving off the road or into the opposite lane. LDW consists ...

Vehicle capacity weight
The load capacity of your vehicle is determined by weight, not by available cargo space. The maximum load you can carry in your vehicle is shown on the vehicle placard attached to the driver ...