Nissan Maxima: Drive belt
1. Power steering fluid pump.
2. Generator.
3. Air conditioner compressor.
4. Crankshaft pulley.
WARNING:
Be sure the ignition switch is in the OFF or LOCK position before servicing drive belt.
The engine could rotate unexpectedly.
1. Visually inspect the belt for signs of unusual wear, cuts, fraying or looseness. If the belt is in poor condition or is loose, have it replaced or adjusted by a NISSAN dealer.
2. Have the belt checked regularly for condition and tension in accordance with the maintenance schedule found in the NISSAN Service and Maintenance Guide.
Variable voltage control system
CAUTION:
- Do not ground accessories directly to the battery terminal. Doing so will bypass
the variable voltage control system and the vehicle battery may not charge completely.
- Use electrica ...
Replacing spark plugs
Iridium-tipped
spark plugs
It is not necessary to replace iridium-tipped (A) spark plugs as frequently as
conventional type spark plugs because they last much longer. Follow the maintenan ...
See also:
Finish Damage
Any stone chips, fractures, or deep scratches in the finish should be repaired right away. Bare metal will corrode quickly and may develop into major repair expense.
Minor chips and scratches can be ...
Switching on DISTRONIC PLUS, storing
the current speed and maintaining it
Important safety notes
WARNING
The vehicle can be braked when DISTRONIC
PLUS is activated. For this reason, deactivate
DISTRONIC PLUS if the vehicle is to be set in
motion by other means ( ...
Curtain air bag
Curtain air bags are located along both sides of the roof rails above the front
and rear doors.
They are designed to help protect the heads of the front seat occupants and the
rear outboard s ...
