Subaru Legacy: Emergency brake - Electronic parking brake - Parking your vehicle - Starting and operating - Subaru Legacy Owners ManualSubaru Legacy: Emergency brake

CAUTION

Use the emergency brake only in case of an emergency. If the emergency brake is excessively used, the brake parts will wear down faster or the brake may not work sufficiently due to rear wheel brake overheating.

NOTE

While using the emergency brake, the brake system warning light and the indicator light on the parking brake switch illuminate and a chirp sounds. If the foot brake has a malfunction, you can stop the vehicle by pressing the parking brake switch continuously.

While applying the emergency brake, the brake system warning light and the indicator on the parking brake switch illuminate and a chirp sounds.

Electronic parking brake system warning

CAUTION

If the brake system warning light flashes, the electronic parking brake system may be malfunctioning. Immediately stop your vehicle in the nearest safe location and contact your SUBARU dealer.

If a malfunction occurs in the electronic parking brake system, the brake system warning light flashes. Refer to “Electronic parking brake system warning” F3-19.

    Hill Holder function
    The electronic parking brake system has a Hill Holder function. If the Hill Holder function is activated, the parking brake will be automatically applied when stopping on an uphill slope with the ...

    Parking tips
    When parking your vehicle, always perform the following items. ● Apply the parking brake. ● For MT models, put the shift lever in the “1” (1st) for upgrade or “R” (Reverse) for ...

    See also:

    Turn signal lamp (halogen headlamps)
    Due to their location, have the bulbs in the left-hand headlamp changed at a qualified specialist workshop, e.g. an authorized Mercedes-Benz Center. •► Switch off the lights. •` ...

    Turning ACC off completely
    From standby mode, press once. From active mode, press twice. The set speed and time interval are then cleared from the system's memory and cannot be resumed by pressing . ...

    General Information
    This device complies with FCC rules Part 15 and Industry Canada RSS-210. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device m ...