Buick LaCrosse: Engine Oil Pressure Light - Warning Lights, Gauges, and Indicators - Instruments and Controls - Buick LaCrosse Owners ManualBuick LaCrosse: Engine Oil Pressure Light

WARNING!
Do not keep driving if the oil pressure is low. The engine can become so hot that it catches fire.

Someone could be burned. Check the oil as soon as possible and have the vehicle serviced.

Notice:
Lack of proper engine oil maintenance can damage the engine. The repairs would not be covered by the vehicle warranty.
Always follow the maintenance schedule for changing engine oil.

The oil pressure light should come

The oil pressure light should come on briefly as the engine is started.

If it does not come on have the vehicle serviced by your dealer.

If the light comes on and stays on, it means that oil is not flowing through the engine properly. The vehicle could be low on oil and might have some other system problem. See your dealer.

For vehicles with the uplevel or eAssist cluster, this telltale displays in the Driver Information Center (DIC) screen.

    When the Light Flashes First and Then Is On Steady
    If the light flashes for about a minute and then stays on, there may be a problem with the TPMS. If the problem is not corrected, the light will come on at every ignition cycle. See Tire Pres ...

    Low Fuel Warning Light
    This light, below the fuel gauge, comes on briefly when the engine is started. If it does not come on have the vehicle serviced by your dealer. If the system is working normally, the indic ...

    See also:

    Security systems
    Your vehicle may have two types of security systems: ● Vehicle security system ● NISSAN Vehicle Immobilizer System ...

    Engine coolant check
    Checking the coolant level CAUTION: Make sure that the coolant level isbetween the MIN and the MAXmarks. Note: Coolant expands when it is hot. The level may therefore extend beyondthe MAX mark. T ...

    Mounting LATCH child restraint fixing systems
    1. Mount the child restraint fixing system; refer to the operating instructions of the system. 2. Ensure that both LATCH anchors are properly connected. ...