Nissan Altima: Exterior and interior lights
Coupe
1. Mirror-mounted turn signal light
(if so equipped)
2. Interior light
3. Map light
4. Headlamp assembly
5. Fog light (if so equipped)
6. Step light
7. High-mount stoplight
8. Trunk light
9. License plate light
10. Rear combination light
Sedan
1. Rear map light
2. Front map light
3. Step light
4. Headlamp assembly
5. Fog light (if so equipped)
6. High-mount stoplight (if so equipped)
7. Trunk light
8. Spoiler mounted stoplight
(if so equipped)
9. Rear combination light
10. License plate light
11. Mirror-mounted turn signal light
(if so equipped)
Replacement procedures
All other lights are either type A, B, C or D. When replacing a bulb, first remove the lens, light and/or cover.
Indicates bulb removal
Indicates bulb installation
Step light
Use a cloth 1 to protect the housing.
Map light
Use a cloth to protect the housing.
Personal light (if so equipped)
Use a cloth 1 to protect the housing.
Interior light
Use a cloth 1 to protect the housing.
Rear combination light
To access the bulbs in the rear combination light:
1 Remove the fasteners. Carefully push back the carpet.
2 Remove the 2 nuts and pull out the rear combination light.
3 Rotate the bulb(s) counterclockwise and pull out to remove:
A Turn signal light
B Sidemarker light
C Tail/stop light
D Backup light
Trunk light
Front park/turn/sidemarker light
Bulb replacement requires the removal of the headlight assembly. If replacement is required, see your NISSAN dealer. ...Upper tether anchor/key cylinder covers
CAUTION Never force the covers into place because the hinge pins can be damaged. Follow the removal and installation instructions to prevent inoperability of the covers. ...See also:
Seatbelt maintenance
To clean the seatbelts, use a mild soap and lukewarm water. Never bleach or dye
the belts because this could seriously affect their strength.
Inspect the seatbelts and attachments including the web ...
Using the Digit Store Command
The digit store command allows a phone number to be stored by entering the digits individually.
1. Press
.
► For vehicles without a navigation system, the system responds “Ready,” followe ...
SeatWarmer
Press the HI or LO side of the seat warmer switch with the ignition is switched
ON.
The indicator on the switch illuminates and the seat warms up.
If a higher temperature is preferred, press the ...