Subaru Legacy: Front fog light switch (if equipped)
The front fog lights operate under the following conditions.
● when the light switch is in the “”
position
● when the light switch is in the “AUTO” position and the headlights turn on automatically
However, the front fog lights turn off when the headlights are switched to high beam.
To turn on the front fog lights, turn the front fog light switch on the turn signal lever upward to the “” position. To turn off the front fog lights, turn the switch back down to the “OFF” position.
The indicator light located on the combination meter will illuminate when the front fog lights are on.
Illumination brightness control
The illumination brightness of the clock display, audio, air conditioner, multi function display and meter/gauge dims under the following conditions. ● when the light switch is in the “ ...Wiper and washer
WARNING In freezing weather, do not use the windshield washer until the windshield is sufficiently warmed by the defroster. Otherwise the washer fluid can freeze on the windshield, blocking your v ...See also:
Using your Owner’s Manual
Before you operate your vehicle, carefully read this manual. To protect yourself
and extend the service life of your vehicle, follow the instructions in this manual.
Failure to observe these instr ...
Illuminated Entry — If Equipped
The courtesy lights will turn on when you press the
unlock button on the Remote Keyless Entry (RKE) transmitter
or open any door.
This feature also turns on the approach lighting in the
outside ...
Global Positioning
System (GPS)
• Obstruction of the GPS can
occur in a large city with tall
buildings; in parking garages;
around airports; in tunnels,
underpasses, or parking
garages; or in an area with very
dense tr ...