Nissan Maxima: Hazard warning flasher switch - Instruments and controls - Nissan Maxima Owners ManualNissan Maxima: Hazard warning flasher switch

Push the switch on to warn other drivers when you must stop or park under emergency

Push the switch on to warn other drivers when you must stop or park under emergency conditions.

All turn signal lights flash.

WARNING:

- If stopping for an emergency, be sure to move the vehicle well off the road.

- Do not use the hazard warning flashers while moving on the highway unless unusual circumstances force you to drive so slowly that your vehicle might become a hazard to other traffic.

- Turn signals do not work when the hazard warning flasher lights are on.

The flashers will operate with the ignition switch placed in any position.

Some state laws may prohibit the use of the hazard warning flasher switch while driving.

    Fog light switch (if so equipped)
    To turn the fog lights on, turn the headlight switch to the position, then turn the fog light switch to the position. To turn the fog lights on with the headlight switch in the AUTOposition, t ...

    Horn
    To sound the horn, push the center pad area of the steering wheel. WARNING: Do not disassemble the horn. Doing so could affect proper operation of the supplemental front air bag system. Tamperin ...

    See also:

    Engine Co
    The cooling system in the vehicle is filled with DEX-COOL® engine coolant. This coolant is designed to remain in the vehicle for 5 years or 240 000 km (150,000 miles), whichever occurs first. The fo ...

    Selecting tire chains
    Use the correct tire chain size when mounting the snow chains. Chain size is regulated for each tire size Side chain: 0.12 in. (3 mm) in diameter 0.39 in. (10 mm) in width 1.18 in. (30 mm) ...

    Shift lock function
    The shift lock function helps prevent the improper operation of the select lever. ● The select lever cannot be operated unless the ignition switch is turned to the “ON” position and the b ...