Subaru Legacy: Headlight - Replacing bulbs - Maintenance and service - Subaru Legacy Owners ManualSubaru Legacy: Headlight

CAUTION

Halogen headlight bulbs become very hot while in use. If you touch the bulb surface with bare hands or greasy gloves, fingerprints or grease on the bulb surface will develop into hot spots, causing the bulb to break. If there are fingerprints or grease on the bulb surface, wipe them away with a soft cloth moistened with alcohol.

NOTE

● If headlight aiming is required, consult your SUBARU dealer for proper adjustment of the headlight aim.

● It may be difficult to replace the bulbs. We recommend that you have the bulbs replaced by your SUBARU dealer if necessary.

Replacing bulbs
WARNING Bulbs may become very hot while illuminated. Before replacing bulbs, turn off the lights and wait until the bulbs cool down, Otherwise, there is the risk of sustaining a burn injury. CAU ...

Low beam light bulbs
1. Pull off the fender lining. For details, refer to “Pulling off the fender lining” F11- 7. 2. Remove the bulb cover, by turning it counterclockwise. 3. Disconnect the electrical connecto ...

See also:

Keys
The following keys are provided with the vehicle. Vehicles without a smart key system (type A) 1 Master keys 2 Valet key 3 Key number plate Vehicles without a smart key system (type B) 1 Mas ...

Windshield Wipers And Washers
The wipers and washers are operated by a switch on the control lever. The lever is located on the right side of the steering column. Windshield Wiper/Washer Lever Rotate the end of the lever ...

Tire pressure monitor warning messages
If the tire pressure monitor detects a significant pressure loss on one or more tires, a warning message is shown in the multifunction display. A warning tone also sounds and the tire pressure ...