Hyundai Sonata: How to use this manual - Introduction - Hyundai Sonata Owners ManualHyundai Sonata: How to use this manual

We want to help you get the greatest possible driving pleasure from your vehicle. Your Owner’s Manual can assist you in many ways. We strongly recommend that you read the entire manual. In order to minimize the chance of death or injury, you must read the WARNING and CAUTION sections in the manual.

Illustrations complement the words in this manual to best explain how to enjoy your vehicle. By reading your manual, you will learn about features, important safety information, and driving tips under various road conditions.

The general layout of the manual is provided in the Table of Contents. A good place to start is the index; it has an alphabetical listing of all information in your manual.

Sections: This manual has eight sections plus an index. Each section begins with a brief list of contents so you can tell at a glance if that section has the information you want.

You will find various WARNINGS, CAUTIONS, and NOTICES in this manual.

These WARNINGS were prepared to enhance your personal safety.You should carefully read and follow ALL procedures and recommendations provided in these WARNINGS, CAUTIONS and NOTICES.

    Fuel requirements
    Your new vehicle is designed to use only unleaded fuel having a pump octane number ((R+M)/2) of 87 (Research Octane Number 91) or higher. Your new vehicle is designed to obtain maximum performance ...

    See also:

    Towing a trailer
    WARNINGS: Do not exceed 100 km/h (62 mph). The rear tyre pressures must beincreased by 0.2 bar (3 psi) abovespecification. See Technicalspecifications. Do not exceed the maximumvehicle and trailer ...

    When checking or servicing in the engine compartment while the engine is running
    WARNING A running engine can be dangerous. Keep your fingers, hands, clothing, hair and tools away from the cooling fan, belts and any other moving engine parts. Removing rings, watches and ties ...

    Using stability control
    Using stability control Press and hold the switch for one second. The switch will illuminate. Press the switch again to turn the systemon. The system will be switched onautomatically every time you ...