Chrysler 200: Instrument Cluster Messages - Gear Ranges - Automatic Transmission - Starting and operating - Chrysler 200 Owners ManualChrysler 200: Instrument Cluster Messages

Messages will be displayed in the instrument cluster to alert the driver when certain unusual conditions occur.

These messages are described below.

Transmission Limp Home Mode

    DRIVE
    This range should be used for most city and highway driving. It provides the smoothest upshifts and downshifts, and the best fuel economy. The transmission automatically upshifts through all for ...

    Transmission Limp Home Mode
    Transmission function is monitored electronically for abnormal conditions. If a condition is detected that could result in transmission damage, Transmission Limp Home Mode is activated. In this ...

    See also:

    Memo
    To switch to the voice recorder mode, say “Memo”. In this mode, you may say the following commands: • “New Memo” (to record a new memo) — During the recording, you may press the Voic ...

    Centrally locking and unlocking the vehicle from the inside
    You can centrally lock or unlock the vehicle from the inside. The central locking/unlocking button does not lock or unlock the fuel filler flap. You cannot unlock the vehicle centrally from th ...

    Windshield Wipers andWashers
    Windshield Wipers 1. MIST 2. OFF 3. INT - Intermittent 4. LO - Low speed 5. HI - High speed 6. Windshield washers Push the right lever up or down to select a position. MIST - The wipe ...