Subaru Legacy: Keys
1) Master key
2) Submaster key
3) Valet key
4) Key number plate
5) Security ID plate
Three types of keys are provided for your vehicle:
Master key, submaster key and valet key. The master key and submaster key fit all locks on your vehicle.
● Ignition switch
● Driver’s door
● Glove box
● Trunk lid (Legacy)
The valet key fits only the ignition switch and door locks. You can keep the trunk and glove box locked when you leave your vehicle and valet key at a parking facility.
CAUTION
Do not attach a large key holder or key case to either key. If it bangs against your knees while you are driving, it could turn the ignition switch from the “ON” position to the “Acc” or “LOCK” position, thereby stopping the engine.
Keys and doors
...
Key number
1) Key number plate
2) Security ID plate
The key number is stamped on the key number plate attached to the key set.
Write down the key number and keep it in another safe place, not in the vehicle ...
See also:
Jump starting
If jump starting is necessary, see Jump starting in the In case of emergency
section of this manual. If the engine does not start by jump starting, the battery
may have to be replaced.
Contact a ...
Changing the battery
You require a CR 2025 3 V cell battery.
•► Take the mechanical key out of the
SmartKey
•► Press mechanical key 2 into the opening
in the SmartKey in the direction of the arrow ...
With Selective Ride Control
1. Move the shift lever to the left
from D (Drive).
The vehicle will be in Sport
Mode. The gear indicator in the
DIC will still display a D for
Drive, and the SPORT MODE
ON message will be ...