Chrysler 200: License Plate Lamp - Bulb Replacement - Maintaining your vehicle - Chrysler 200 Owners ManualChrysler 200: License Plate Lamp

1. Using a small screwdriver, press inward the locking tab on the side of the lamp assembly and pull down on the lamp assembly for removal.

2. Pull bulb from socket, replace, and reinstall the lamp assembly into place ensuring the locking tab is secure.

    Backup Lamps
    1. Open the trunk and gently pull back the trunk liner behind the tail lamp (requires removal of a push pin holding the trunk trim in place near the tail lamp). 2. Remove the two plastic wing nut ...

    See also:

    Locking the vehicle
    Models with keyless drive have a pressure-sensitive area on the outside door handles and a rubber- covered button next to the trunk opening control The doors and the trunk can be locked by pressi ...

    Reporting Safety Defects
    In the US If you believe that your vehicle has a defect which could cause a crash or could cause injury or death, you should immediately inform the National Highway Traffic Safety Administratio ...

    Air vents
    Air vents ...