Subaru Legacy: Main fuse
Main fuse box
The main fuses are designed to melt during an overload to prevent damage to the wiring harness and electrical equipment. Check the main fuses if any electrical component fails to operate (except the starter motor) and other fuses are good. A melted main fuse must be replaced. Use only replacements with the same specified rating as the melted main fuse. If a main fuse blows after it is replaced, have the electrical system checked by your nearest SUBARU dealer.
Fuses
CAUTION
Never replace a fuse with one having a higher rating or with material other than
a fuse because serious damage or a fire could result.
The fuses are designed to melt during an overload to ...
Installation of accessories
Always consult your SUBARU dealer before installing fog lights or any other electrical
equipment in your vehicle. Such accessories may cause the electronic system to malfunction
if they are incorr ...
See also:
Brake Pedal Travel
See your dealer if the brake pedal
does not return to normal height,
or if there is a rapid increase in
pedal travel. This could be a sign
that brake service might be
required. ...
Brake and clutch fluid check
WARNING:
Do not allow brake fluid to touchyour skin or eyes. If this happens,rinse the affected areas immediatelywith plenty of water and contact yourdoctor.
The brake and clutch systems aresupplied ...
Initialization
The initialization process adopts the set inflation
tire pressures as reference values for the detection of a flat tire.
Initialization is started by confirming
the inflation pressures.
Do not ...
