Buick LaCrosse: Manual Reclining Seatbacks
WARNING!
You can lose control of the
vehicle if you try to adjust a
manual driver seat while the
vehicle is moving. The sudden
movement could startle and
confuse you, or make you push a
pedal when you do not want to.
Adjust the driver seat only when
the vehicle is not moving.
WARNING!
If either seatback is not locked, it
could move forward in a sudden
stop or crash. That could cause
injury to the person sitting there.
Always push and pull on the
seatbacks to be sure they are
locked.
To recline the seatback:
1. Lift the recline lever.
2. Move the seatback to the desired position, and then release the lever to lock the seatback in place.
3. Push and pull on the seatback to make sure it is locked.
To return the seatback to the upright position:
1. Lift the lever fully without applying pressure to the seatback, and the seatback will return to the upright position.
2. Push and pull on the seatback to make sure it is locked.
Reclining Seatbacks
Reclining Seatbacks WARNING! Sitting in a reclined position when the vehicle is in motion can be dangerous. Even when buckled up, the safety belts cannot do their job when reclined like th ...Power Reclining Seatbacks
Power Reclining Seatbacks To adjust a power seatback, if equipped: • Tilt the top of the control rearward to recline. • Tilt the top of the control forward to raise. ...See also:
Programming trouble-diagnosis
If the HomeLink does not quickly learn the handheld
transmitter information:
● replace the hand-held transmitter batteries
with new batteries.
● position the hand-held transmitter with ...
Switching the split screen on and off
1. Press the button.
2. "Split screen"
3. Move the controller until the split screen is
selected.
4. Press the controller or select "Split screen
content".
5. Select the d ...
Vehicle load limit – how to determine
The load capacity of your vehicle is determined by weight, not by available cargo
space. The load limit of your vehicle is shown on the vehicle placard attached to
the driver’s side B-pillar. Lo ...