Buick LaCrosse: Memory Features - Initial Drive Information - In Brief - Buick LaCrosse Owners ManualBuick LaCrosse: Memory Features

On vehicles with the memory

On vehicles with the memory feature, the “1” and “2” buttons on the outboard side of the driver seat are used to manually save and recall the driver seat and outside mirror positions. These manually stored positions are referred to as Button Memory positions.

The vehicle will also automatically save driver seat and outside mirror positions to the current driver Remote Keyless Entry (RKE) transmitter when the ignition is placed in OFF. These automatically stored positions are referred to as RKE Memory positions.

Storing Button Memory Positions

To save positions into Button Memory:

1. Adjust the driver seat, seatback recliner, and both outside mirrors to the desired driving positions.

2. Press and hold MEM (Memory) and “1” at the same time until a beep sounds.

3. Repeat Steps 1 and 2 for a second driver using “2.”.

To recall the manually saved Button Memory positions, press and hold “1” or “2.” The driver seat and outside mirrors move to the positions stored to those buttons when pressed. Releasing “1” or “2” before the stored positions are reached stops the recall.

To automatically recall RKE Memory positions, unlock the driver door with the RKE transmitter, and open the driver door. On vehicles with Keyless Access, opening the driver door when an RKE transmitter is present will activate the RKE Memory recall. If the driver door is already open, pressing the RKE transmitter activate the RKE Memory recall. button will also activate the RKE Memory recall.

The driver seat and outside mirrors will move to the previously saved RKE Memory positions.

See Memory Seats for more information.

Easy Exit Driver Seat

This feature moves the seat rearward allowing the driver more room to exit the vehicle.

To activate, place the ignition in OFF and open the driver door. If the driver door is already open, placing the ignition in OFF will activate the easy exit driver seat.

This feature is turned on or off using the vehicle personalization menu.

See Vehicle Personalization for more information.

    Lumbar Adjustment
    Lumbar Adjustment To adjust the lumbar support, if available: • Press and hold the front or rear of the control to increase or decrease lumbar support. • Press and hold the top or botto ...

    Heated and Ventilated Seats
    Heated and Ventilated Seat Buttons Shown, Heated Seat Buttons Similar If available, the buttons are on the climate control panel. To operate, the ignition must be on. Press to heat the seat c ...

    See also:

    Do not operate the engine within the tachometer's RED ZONE. This may cause severe engine damage.
    Engine temperature gauge This gauge shows the temperature of the engine coolant when the ignition switch is ON. Do not continue driving with an overheated engine. If your vehicle overheats, re ...

    Automatic transmission: transporting your vehicle
    Note Your vehicle is not permitted to be towed. Therefore, contact a service center in the event of a breakdown. Do not have the vehicle towed Have your vehicle transported on a loading platf ...

    Exit Lighting
    This allows selection of how long the exterior lamps stay on when leaving the vehicle and it is dark outside. Press SELECT when Exit Lighting is highlighted. Turn the Menu knob to select Of ...