Chrysler 200: Mini-Trip Computer — If Equipped
The Mini-Trip Computer is located in the instrument cluster and features a driver-interactive trip information and temperature display.
NOTE:
The system will display the last known outside
temperature when starting the vehicle and may need to
be driven several minutes before the updated temperature
is displayed. Engine temperature can also affect the
displayed temperature; therefore, temperature readings
are not updated when the vehicle is not moving.
Instrument Cluster Descriptions
1. Temperature Gauge The temperature gauge shows engine coolant temperature. Any reading below the red mark of the gauge shows that the engine cooling system is operating properly. The gauge poi ...Control Buttons
Mini-Trip Control Buttons STEP Button Press the STEP button located on the steering wheel to scroll through sub menus (i.e., Temperature, Trip Functions: Odometer, Trip A, Trip B). RESET Butto ...See also:
Tire pressure of at least 180 kPa
(1.8 bar/26 psi) is not reached
If, after five minutes, a pressure of 180 kPa
(1.8 bar/26 psi) has not been achieved:
•► Press the on/off switch on the tire inflation
compressor to 0.
The tire inflation compressor is s ...
Introduction
City Safety™1 is a support system designed to help the driver avoid low speed
collisions when driving in slow-moving, stop-and-go traffic.
City Safety™ is not active if your vehicle’s speed i ...
Advanced Front Air Bag Features
The Advanced Front Air Bag system has multistage
driver and front passenger air bags. This system provides
output appropriate to the severity and type of collision as
determined by the Occupant ...