Outside Mirrors

Check the mirror angles before driving.

Mirror type

Flat type (driver's side)

Flat surface mirror.

Convex type (front passenger side)

The mirror has single curvature on its surface.

WARNING:

Changing lanes without looking over the appropriate shoulder is dangerous, particularly not taking the actual distance of the vehicle in the right convex mirror. You could have a serious accident. What you see in the convex mirror is closer than it appears.

Power mirror

The ignition must be switched ACC or ON.

To adjust:

1. Press the left or right side of the selector switch to choose the left or right side mirror.

2. Depress the mirror switch in the appropriate direction.

After adjusting the mirror, lock the control by placing the selector switch in the middle position.

Ground illumination light

Light is on or off when the illuminated entry system is on.

Auto-dimming door mirrors

The movement of the auto-dimming door mirrors is interlocked with the autodimming rearview mirror in the interior to automatically reduce glare from rear oncoming vehicles.

Refer to Rearview mirror.

Rearview Mirror

WARNING:

Cargo stacked higher than the seatbacks is dangerous. It can block your view in the rearview mirror, which might cause you to hit another car when changing lanes.

Rearview mirror adjustment

Before driving, adjust the rearview mirror to center on the scene through the rear window.

Manual day/night mirror

Auto-dimming mirror

NOTE:

For the manual day/night mirror, perform the adjustment with the day/night lever in the day position.

Reducing glare from headlights

Manual day/night mirror

Push the day/night lever forward for day driving. Pull it back to reduce glare of headlights from cars at the rear.

Auto-dimming mirror

The auto-dimming mirror automatically reduces glare of headlights from cars at the rear when the ignition is switched ON.

The door mirrors also adjust in conjunction with the interior rear view mirror.

Press the OFF button (O) to cancel the automatic dimming function. The indicator light will turn off.

To reactivate the automatic dimming function, press the ON button (l). The indicator light will illuminate.

NOTE:

- Do not use glass cleaner or suspend objects on or around the light sensor. Otherwise, light sensor sensitivity will be affected and may not operate normally.

l For information regarding the 3 buttons (,,) on the auto-dimming mirror, refer to HomeLink Wireless Control System.

- The auto-dimmer function is canceled when the ignition is switched ON and the shift lever/selector lever is in reverse (R).