Nissan Altima: Moonroof
When power window switch does not operate
If the power window automatic function (closing only) does not operate properly, perform the following procedure to initialize the power window system:
1. Place the ignition switch in the ON position.
2. Open the window more than halfway by operating the power window switch.
3. Pull the power window switch and hold it to close the window, and then hold the switch more than 3 seconds after the window is closed.
4. Release the power window switch. Operate the window by the automatic function to confirm the initialization is complete. The power window automatically opens or closes depending on if the automatic down or up function is selected.
5. Perform steps 2 through 4 above for other windows. If the power window function does not operate properly after performing the above procedure, see a NISSAN dealer for assistance.
Auto-reverse function
If the control unit detects something caught in the
window as it is closing, the window will be immediately
lowered.
The auto-reverse function can be activated when
the window is closed by automat ...
Automatic moonroof
The moonroof will only operate when the ignition
switch is placed in the ON position. The automatic
moonroof is operational for about 45 seconds,
even if the ignition switch is placed in the
ACC ...
See also:
NISSAN Voice Recognition Standard Mode
The Standard Mode enables control of navigation, phone and vehicle information.
With this setting active, commands that are available are always shown on the display
and announced by the system.
...
Stopping the engine
WARNING
Do not stop the engine when the vehicle is moving. This will cause loss of power
to the power steering and the brake booster, making steering and braking more difficult.
It could also res ...
Key
Illuminated ignition switch
Whenever a front door is opened, the ignition switch will be illuminated for
your convenience, provided the ignition switch is not in the ON position. The light
will ...
