Honda Accord: Phone Setup - Bluetooth<b> </b>HandsFreeLink - Features - Honda Accord Owners ManualHonda Accord: Phone Setup

This command group is available for paired cell phones.

Phone pairing tips

You cannot pair your phone while the vehicle is moving.

Your phone must be in discovery or search mode to pair. Refer to your phone’s manual.

Up to six phones can be paired.

Your phone’s battery may drain faster when it is paired to HFL.

If after three minutes your phone is not ready to pair or a phone is not found, the system will time out and return to idle.

To pair a cell phone:

1. Press and release the HFL Talk button. If you are pairing a phone for the first time, HFL will give you information about the pairing process. If it is not the first phone you are pairing, say ‘‘Phone setup’’ and say ‘‘Pair.’’

2. Follow the HFL prompts and put your phone in discovery or search mode. HFL will give you a 4-digit pairing code and begin searching for your phone.

3. When your phone finds a Bluetooth device, select HFL from the options and enter the 4-digit code from the previous step.

4. Follow the HFL prompts and name the newly paired phone.

To rename a paired phone:

Press and release the HFL Talk button before a command.

1. Say ‘‘Phone setup.’’ 2. Say ‘‘Edit’’ after the prompts.

3.If there is more than one phone paired to the system, HFL will ask you which phone’s name you want to change. Follow the HFL prompts and rename the phone.

To delete a paired phone:

Press and release the HFL Talk button before a command.

1. Say ‘‘Phone setup.’’

2. Say ‘‘Delete’’ after the prompts.

3. HFL will ask you which phone you want to delete. Follow the HFL prompts to continue with the deletion.

To hear the names of all paired phones:

Press and release the HFL Talk button before a command.

1. Say ‘‘Phone setup.’’ 2. Say ‘‘List’’ after the prompts.

3. HFL will read out all the paired phone’s names.

To hear which paired phone is currently linked:

Press and release the HFL Talk button before a command.

1. Say ‘‘Phone setup.’’ 2. Say ‘‘Status’’ after the prompts.

3. HFL will tell you which phone is linked to the system.

To change from the currently linked phone to another paired phone:

Press and release the HFL Talk button before a command.

1. Say ‘‘Phone setup.’’ 2. Say ‘‘Next phone’’ after the prompts.

3. HFL disconnects the linked phone and searches for another paired phone.

4. Once another phone is found, it is linked to the system. HFL will inform you which phone is now linked.

If no other phones are found or paired, HFL will inform you that the original phone is linked again.

To change the pairing code setting:

Press and release the HFL Talk button before a command.

1. Say ‘‘Phone setup.’’ 2. Say ‘‘Set pairing code’’ after the prompts.

3. If you want HFL to create a random code each time you pair a phone, say ‘‘Random.’’ If you want to choose your own 4-digit code to be used each time, say ‘‘Fixed’’ and follow the HFL prompts.

    How to Use HFL
    The ignition switch must be in the ACCESSORY (I) or ON (II) position.   To use HFL, you need to pair your Bluetooth-compatible cell phone to the system. ...

    Making a Call
    You can make calls using any phone number or a name in the HFL phonebook. You can also redial the last number called. Bluetooth is the wireless technology that links your phone to HFL. HFL ...

    See also:

    Attaching the towing eyelet
    The towing eyelet is located under the floor of the trunk. This eyelet must be screwed into the positions provided on the right sides of either the front or rear bumper (see illustration). ...

    Increasing or decreasing vehicle speed
    Specify desired speed in the range from approx. 4 mph/6 km/h to approx. 15 mph/25 km/h using the rocker switch of the cruise control on the steering wheel. Vehicle speed can be changed by light ...

    How to Inspect the Engine Air Cleaner/Filter
    To inspect the air cleaner/filter, remove the filter from the vehicle and lightly shake the filter to release loose dust and dirt. If the filter remains covered with dirt, a new filter is re ...