Honda Accord: Power Windows

Honda Accord: Power Windows - Instruments and Controls - Honda Accord (2013–2017) Owners ManualHonda Accord: Power Windows

Turn the ignition switch to the ON

Turn the ignition switch to the ON (II) position to raise or lower either window. To open a window, push the switch down and hold it. Release the switch when you want the window to stop. Pull back on the switch and hold it to close the window.

Closing a power window on

Closing a power window on someone’s hands or fingers can cause serious injury.

Make sure your passengers are away from the windows before closing them.

AUTO - To open either window fully (driver’s window only on LX), push the window switch firmly down to the second detent, then release it.

The window automatically goes down all the way. To stop the window from going all the way down, pull back on the window switch briefly.

To close either window fully (driver’s window only on LX), pull back the window switch firmly to the second detent, then release it. The window automatically goes all the way up. To stop the window from going all the way up, push down on the window switch briefly.

When you push the main switch in, the indicator comes on and the passenger’s window cannot be raised or lowered. Use the main switch when you have children in the vehicle so they do not injure themselves by operating the window unintentionally. To cancel this feature, push on the switch again.

The switch will pop out and the indicator will go off.

The windows and the main switch feature will operate for up to 10 minutes after you turn off the ignition switch. Opening either door cancels this function.

AUTO REVERSE - If either window (driver’s window only on LX) senses any obstacle while it is closing automatically, it will reverse direction, and then stop. To close the window, remove the obstacle, then use the window switch again.

Auto reverse stops sensing when the window is almost closed. You should always check that all passengers and objects are away from the window before closing it.

NOTE: The driver’s window auto reverse function is disabled when you continuously pull up the switch.

Opening theWindows and Moonroof with the Remote Transmitter

You can open both windows and the

You can open both windows and the moonroof (if equipped) from the outside with the remote transmitter.

1. Press the UNLOCK button once to unlock the driver’s door.

2. Press the UNLOCK button a second time, and hold it. The passenger’s door unlocks, and both windows and the moonroof start to open. To stop the windows and moonroof, release the button.

3. To open the windows and moonroof further, press the button again (within 10 seconds of step 1) and hold it. If the windows and the moonroof stop before the desired position, repeat steps 1 and 2.

You cannot close the windows or the moonroof with the remote transmitter.

Opening/Closing theWindows and Moonroof with the Key

You can open and close the windows

You can open and close the windows and the moonroof (if equipped) with the key in the driver’s door lock.

To open:

1. Insert the key in the driver’s door lock.

2. Turn the key clockwise, then release it.

3. Turn the key clockwise again, and hold it. Both windows and the moonroof start to open. To stop the windows and the moonroof, release the key.

4. To open the windows and the moonroof further, turn and hold the key again (within 10 seconds of step 2).

To close:

1. Insert the key in the driver’s door lock.

2. Turn the key counterclockwise, then release it.

3. Turn the key counterclockwise again, and hold it. Both windows and the moonroof start to close.

To stop the windows and the moonroof, release the key.

4. To close the windows and the moonroof further, turn and hold the key again (within 10 seconds of step 2).

NOTE: If the windows and the moonroof stop before the desired position, repeat steps 2 and 3.