BMW 5 Series: Programmable memory buttons
- General information
- Saving a function
- Running a function
- Displaying the button assignment
- Deleting the button assignments
Switching the split screen on and off
1. Press the button. 2. "Split screen" 3. Move the controller until the split screen is selected. 4. Press the controller or select "Split screen content". 5. Select the d ...General information
The iDrive functions can be stored on the programmable memory buttons and called up directly, e.g., radio stations, navigation destinations, phone numbers and entry points into the menu. The ...See also:
Taillamps, Turn Signal, Stoplamps, and Back-Up Lamps
A. Back-Up Lamp
B. Turn Signal Lamp
To replace one of these lamps:
1. Open the trunk. See Trunk.
2. Remove the fasteners and pull
back the trunk trim.
3. Remove the four plastic wing
nuts h ...
DISTRONIC PLUS displays in the
multifunction display
General notes
You can select the distance display in the
Assistance menu of the onboard
computer.
Display when DISTRONIC PLUS is
deactivated
•► Select the Distance Display funct ...
Checking the coolant level
Check the coolant level at each fuel stop.
1. Check the coolant level on the outside of the reservoir while the engine is
cool.
2. If the level is close to or lower than the “LOW” level mark ...