Buick LaCrosse: Recording from Audio CDs - Mass Storage Media (MEM) - Audio Players - Infotainment System - Buick LaCrosse Owners ManualBuick LaCrosse: Recording from Audio CDs

The infotainment system can record the current song playing or all songs from an audio CD to MEM. A status bar appears on the top of the display when the recording process starts and disappears when the process has ended. Copy protected CDs cannot be recorded to MEM.

Recording to MEM

Press REC Current Song or Record All Songs, then select Record Current Song or Record All Songs on Disc. If the track has started playing, the system will restart the track and begin recording from the beginning of the track. When the song recording is completed, the message Song Recorded to MEM displays, and there may be a slight pause.

Songs recorded to MEM are stored as the current date, disc, and track number.

Re-recording a Previously Recorded Disc

If the disc or track has already been recorded to MEM, the message The Song(s) is Already Recorded displays.

Stopping the Recording

Press REC an audio CD to display the stop while recording from an audio CD to display the stop recording option. Select Stop Recording Song to MEM.

Renaming Recorded Discs

Discs that have been recorded to MEM can be renamed.

1. Turn the Menu knob.

2. Select Rename Recorded Discs.

3. Select the disc.

4. Select Album or Artist to rename either one.

5. Use the Menu knob to enter the character sequence. See Operation for more information.

    Control Buttons
    The buttons used to control the MEM player are: MEM/DVD/AUX: Press to select the MEM player. or : Press to select tracks or to rewind or fast forward within a track. INFO: Press to displ ...

    Recording from MP3/WMA Discs or USB Storage Devices
    USB Host Support The USB connector uses the USB standards, 1.1 and 2.0. USB Supported Devices • USB Flash Drives • Portable USB Hard Drives Recording to MEM Press REC , then select Record ...

    See also:

    Mechanical key
    The Intelligent Key contains the mechanical key. To remove the mechanical key, release the lock knob on the back of the Intelligent Key. To install the mechanical key, firmly insert it into the ...

    Brake fluid
    ■ Checking fluid level The brake fluid level should be between the “MAX” and “MIN” lines on the tank. “MAX” “MIN” ■ Adding fluid Make sure to check the flu ...

    Checking Coolant
    The vehicle must be on a level surface when checking the coolant level. Check to see if coolant is visible in the coolant surge tank. If the coolant inside the coolant surge tank is boiling ...