Buick LaCrosse: Removing the Spare Tire and 
Tools - Tire Changing - Wheels and Tires - Vehicle Care - Buick LaCrosse Owners ManualBuick LaCrosse: Removing the Spare Tire and Tools

The equipment you need is located in the trunk.

1. Open the trunk.

2. Remove the spare tire cover.

3. Turn the retainer nut

3. Turn the retainer nut counterclockwise and remove the spare tire.

4. Place the spare tire next to the tire being changed.

A. Screwdriver

A. Screwdriver
B. Tow Hook (If Equipped)
C. Jack
D. Wrench (In Bag)
E. Trim Removal (If Equipped)
F. Fastener (If Equipped)

The jack and tools are stored below the spare tire.

Place the tools next to the tire being changed.

    Removing the Flat Tire and Installing the Spare Tire
    1. Do a safety check before proceeding. See If a Tire Goes Flat for more information. 2. Turn the wheel wrench counterclockwise to loosen the wheel nut caps. If needed, finish loosening th ...

    See also:

    Maintenance Replacement Parts
    Replacement parts identified below by name, part number, or specification can be obtained from your dealer. ...

    Avoiding unintentional alarms
    The tilt alarm sensor and interior motion sensor can be switched off together, such as in the following situations: ▷ In automatic car washes. ▷ In duplex garages. ▷ During tr ...

    If you think something is wrong
    If you notice any of the following symptoms, your vehicle probably needs adjustment or repair. Contact your Toyota dealer as soon as possible. ■ Visible symptoms ● Fluid leaks under ...