Nissan Altima: Shoulder belt height adjustment
(Sedan, front seats) - Three-point type seat belt with retractor - Seat belts - Safety—Seats, seat belts and supplemental restraint system - Nissan Altima Owners ManualNissan Altima: Shoulder belt height adjustment (Sedan, front seats)

The shoulder belt anchor height should be adjusted

The shoulder belt anchor height should be adjusted to the position best for you. See “Precautions on seat belt usage” earlier in this section. To adjust, pull out the adjustment button 1 and move the shoulder belt anchor to the desired position 2 , so the belt passes over the center of the shoulder. The belt should be away from your face and neck, but not falling off your shoulder. Release the adjustment button to lock the shoulder belt anchor into position.

WARNING

● After adjustment, release the adjustment button and try to move the shoulder belt anchor up and down to make sure it is securely fixed in position.

● The shoulder belt anchor height should be adjusted to the position best for you. Failure to do so may reduce the effectiveness of the entire restraint system and increase the chance or severity of injury in an accident.

    Checking seat belt operation
    Seat belt retractors are designed to lock seat belt movement by two separate methods: ● When the seat belt is pulled quickly from the retractor. ● When the vehicle slows down rapidly. ...

    Shoulder belt guide (Coupe)
    The shoulder arm can be adjusted to allow easier access to the shoulder belt. The arm can also be folded down to allow rear seat passengers easier access. ...

    See also:

    Recreational Vehicle Towing
    Recreational vehicle towing means towing the vehicle behind another vehicle such as a motor home. The two most common types of recreational vehicle towing are known as dinghy towing and doll ...

    Acceleration
    Rapid acceleration on snow covered, wet, or other slippery surfaces may cause the driving wheels to pull erratically to the right or left. This phenomenon occurs when there is a difference in th ...

    Adjusting the height
    ▷ To raise: pull. ▷ To lower: press the button, arrow 1, and push the head restraint down. ...