BMW 5 Series: Snap-in adapter - Telephone - Communication - BMW 5 Series Owners ManualsBMW 5 Series: Snap-in adapter

General information

Detailed information about snap-in adapter, which supports the functions of the mobile phone, available from the service center.

Notes

At high temperatures, the charge function of the mobile phone can be limited where appropriate and the functions are no longer executed.

When the mobile phone is used via the vehicle, heed the operating manual of the mobile phone.

Installation position

In the center armrest.

Inserting the snap-in adapter

1. Press the button and remove the cover.

2. Insert the snap-in adapter at the front, arrow

2. Insert the snap-in adapter at the front, arrow 1, and press down, arrow 2, until it engages.

Inserting the mobile phone

Inserting the mobile phone

1. Depending on the mobile phone, remove the protective cap from the antenna connector and from the USB connection of the mobile phone.
2. Slide the mobile phone with the buttons facing up in the direction of the electrical connections, arrow 1, and push downward, arrow 2 until it engages.

Removing the mobile phone

Removing the mobile phone

Press the button and remove the mobile phone.

Press the button and remove the mobile phone.

    Voice operation
    Vehicles equipped with the voice activation system: operation. Vehicles not equipped with the voice activation system: depending on the equipment, the mobile phone can be voice operated as descr ...

    Office
    Vehicle equipment All standard, country-specific and optional equipment that is offered in the model series is described in this chapter. Therefore, equipment is also described that is not avai ...

    See also:

    Safety Belts
    This section of the manual describes how to use safety belts properly. It also describes some things not to do with safety belts. WARNING Do not let anyone ride where a safety belt cannot be worn ...

    Cleaning the wiper blades
    WARNING Before cleaning the windshield or wiper blades, switch off the windshield wipers and remove the SmartKey from the ignition lock. On vehicles with KEYLESS-GO, press the Start/Stop b ...

    Checking settings
    The current Collision Warning settings can be checked by pressing MY CAR on the center console control panel and going to Settings Car settings Driver support systems Collision Warning. ...