Mercedes-Benz E-Class: Starting procedure with the SmartKey
To start the engine using the SmartKey instead of KEYLESS-GO, pull the Start/ Stop button out of the ignition lock.
•► To start a gasoline engine: turn the SmartKey to position 3 in the ignition lock and release it as soon as the engine is running.
•► To start a diesel engine: turn the SmartKey to position 2 in the ignition lock.
The preglow indicator lamp in the instrument cluster lights up.
•► When the preglow indicator lamp goes out, turn the SmartKey to position 3 and release it as soon as the engine is running.
You can start the engine without preglow if the engine is warm.
Automatic transmission
•► Shift the transmission to position P. The transmission position display in the multifunction display shows P. You can also start the engine when the transmission is in position N. ...Using KEYLESS-GO to start the engine
WARNING As long as the SmartKey is in your vehicle, the vehicle can be started. Therefore, never leave children unattended in the vehicle, as they could otherwise accidentally start the eng ...See also:
Recreational Towing – All Models
Recreational towing is allowed ONLY if the front wheels
are OFF the ground. This may be accomplished using a
tow dolly or vehicle trailer. If using a tow dolly, follow
this procedure:
1. Proper ...
Passenger Compartment Air Filter
The filter removes dust, pollen, and other airborne irritants from outside air that is pulled into the vehicle.
The filter should be replaced as part of routine scheduled maintenance.
See Scheduled ...
Driver Information Center (DIC)
The DIC display is located in the
center of the instrument panel
cluster. It shows the status of many
vehicle systems. The controls for
the DIC are located on the turn
signal lever.
A. SE ...