Toyota Camry: Stopping the engine - Engine (ignition) switch (vehicles with a smart key system) - Driving procedures - When driving - Toyota Camry Owners ManualToyota Camry: Stopping the engine

  1. Stop the vehicle.
  2. Shift the shift lever to P.
  3. Set the parking brake.
  4. Release the brake pedal.
  5. Press the “ENGINE START STOP” switch.
  6. Check that the smart key system indicator light (green) is off.
    Starting the engine
    Check that the parking brake is set. Check that the shift lever is set in P. If the shift lever is not set in P, the engine may not be started. Firmly depress the brake pedal. The smart key ...

    Changing “ENGINE START STOP” switch modes
    Modes can be changed by pressing the “ENGINE START STOP” switch with brake pedal released. (The mode changes each time the switch is pressed.) Off* The emergency flashers can be used. T ...

    See also:

    Vehicle load limit
    Tire and loading information label The label located on the driver's door sill gives the original tire size, cold tire pressures recommended for your vehicle, the number of people that ca ...

    Without The Ignition Key
    Special care must be taken when the vehicle is towed with the ignition in the LOCK position. Flatbed towing is the preferred towing method. However, if a flatbed towing vehicle is not available, ...

    Locking and unlocking from the inside
    WARNING Keep all doors locked when you drive, especially when small children are in your vehicle. Along with the proper use of seatbelts and child restraints, locking the doors reduces the chanc ...