Buick LaCrosse: Storing and Deleting Phone 
Numbers - Bluetooth (Voice Recognition) - Phone - Infotainment System - Buick LaCrosse Owners ManualBuick LaCrosse: Storing and Deleting Phone Numbers

The system can store up to 30 phone numbers as name tags in the Hands-Free Directory that is shared between the Bluetooth and OnStar systems.

The following commands are used to delete and store phone numbers.

Store: This command will store a phone number, or a group of numbers as a name tag.

Digit Store: This command allows a phone number to be stored as a name tag by entering the digits one at a time.

Delete: This command is used to delete individual name tags.

Delete All Name Tags: This command deletes all stored name tags in the Hands-Free Calling Directory and the Destinations Directory.

Using the “Store” Command

1. Press responds “Ready,” followed by. The system responds “Ready,” followed by a tone.

2. Say “Store.”.

3. Say the phone number or group of numbers you want to store all at once with no pauses, then follow the directions given by the system to save a name tag for this number.

Using the “Digit Store” Command

If an unwanted number is recognized by the system, say “Clear” at any time to clear the last number.

To hear all of the numbers recognized by the system, say “Verify” at any time.

1. Press responds “Ready,” followed by. The system responds “Ready,” followed by a tone.

2. Say “Digit Store.”.

3. Say each digit, one at a time, that you want to store. After each digit is entered, the system repeats back the digit it heard followed by a tone. After the last digit has been entered, say “Store,” and then follow the directions given by the system to save a name tag for this number.

Using the “Delete” Command

1. Press responds “Ready,” followed by. The system responds “Ready,” followed by a tone.

2. Say “Delete.”.

3. Say the name tag you want to delete.

Using the “Delete All Name Tags” Command

This command deletes all stored name tags in the Hands-Free Calling Directory and the Destinations Directory.

To delete all name tags:

1. Press responds “Ready,” followed by. The system responds “Ready,” followed by a tone.

2. Say “Delete all name tags.”

    Pairing
    A Bluetooth-enabled cell phone must be paired to the Bluetooth system and then connected to the vehicle before it can be used. See your cell phone manufacturer's user guide for Bluetooth fun ...

    Listing Stored Numbers
    The list command will list all the stored numbers and name tags. Using the “List” Command 1. Press . The system responds “Ready,” followed by a tone. 2. Say “Directory.”. 3. Say ...

    See also:

    If the electronic key does not operate properly (vehicles with a smart key system)
    If communication between the electronic key and the vehicle is interrupted or the electronic key cannot be used because the battery is depleted, the smart key system and wireless remote control ...

    Manual locking
    In certain situations (e.g., if there is no electrical current in the vehicle), the doors can be locked manually. The detachable key blade (see page 59) can be used in the lock cylinder in the dr ...

    Brake/Clutch Fluid
    Inspecting Brake/Clutch Fluid Level The brakes and clutch draw fluid from the same reservoir. Inspect the fluid level in the reservoir regularly. It should be kept at MAX. The level normally drops ...