Toyota Camry: Switching the display - Using the radio - Using the audio system - Interior features - Toyota Camry Owners ManualToyota Camry: Switching the display

Press Each time  is pressed, the display.

Each time changes in the following order: is pressed, the display changes in the following order:

Frequency → Channel name → Radio text.

■Reception sensitivity

●Maintaining perfect radio reception at all times is difficult due to the continually changing position of the antenna, differences in signal strength and surrounding objects, such as trains, transmitters, etc.

●The radio antenna is mounted inside the rear window. To maintain clear radio reception, do not attach metallic window tinting or other metallic objects to the antenna wire mounted inside the rear window.

■Certifications for the radio tuner

This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by trying one or more of the following:

●Reorienting or relocating the receiving antenna.

●Increasing the separation between the equipment and receiver.

●Connecting the equipment into an outlet on a circuit different from that to which the receiver is connected.

●Consulting the dealer or an experienced radio/TV technician for help.

    Scanning radio stations
    ■ Scanning the preset radio stations Press and hold until you hear a beep. Preset stations will be played for 5 seconds each. When the desired station is reached, press once again. &# ...

    See also:

    Blind Spot Assist
    Important safety notes Blind Spot Assist uses a radar sensor system to monitor the areas on both sides of your vehicle. It supports you from speeds of approximately 20 mph (30 km/h). A warning ...

    Troubleshooting Tips
    If you are having trouble programming HomeLink , here are some of the most common solutions: • Replace the battery in the original hand-held transmitter. • Press the LEARN button on the Garage ...

    Precautions when starting and driving
    WARNING ● Do not leave children or adults who would normally require the assistance of others alone in your vehicle. Pets should also not be left alone. They could accidentally injure thems ...