Subaru Legacy: System alarm operation - Alarm system - Keys and doors - Subaru Legacy Owners ManualSubaru Legacy: System alarm operation

The alarm system will give the following alarms when triggered:

● The vehicle’s horn will sound and the turn signal lights will flash for 30 seconds.
● If any door (or the rear gate/trunk lid) remains open after the 30-second period, the horn will continue to sound for a maximum of 3 minutes. If the door (or the rear gate/trunk lid) is closed while the horn is sounding, the horn will stop sounding with a delay of up to 30 seconds.

The alarm is triggered by:

● Opening a door, the rear gate or trunk lid
● Physical impact to the vehicle, such as forced entry (only models with shock sensors (dealer option))

NOTE

The alarm system can be set to trigger illumination of map lights and dome light. The map lights and dome light notification is deactivated as the factory setting. Refer to “Function settings” F20. A SUBARU dealer can activate the system. Contact your SUBARU dealer for details.

    Alarm system
    The alarm system helps to protect your vehicle and valuables from theft. The horn sounds and the turn signal lights flash if someone attempts to break into your vehicle. The system can be armed a ...

    Activating and deactivating the alarm system
    To change the setting of your vehicle’s alarm system for activation or deactivation, do the following. 1. Disarm the alarm system. Refer to “Disarming the system” F2-18. 2. Sit in the driver ...

    See also:

    Useful information
    This Operator's Manual describes all models and all standard and optional equipment of your vehicle available at the time of publication of the Operator's Manual. Country-specific differences ...

    Defogging the windshield
    Press . The dehumidification function operates and fan speed increases. Set the outside/recirculated air mode button to the outside air mode if the recirculated air mode is used. (It may ...

    Introduction
    Collision Warning with Full Auto-brake and Pedestrian Detection is designed to assist the driver if there is a risk of a collision with a pedestrian, a vehicle ahead that is at a standstill or one ...