Subaru Legacy: System maintenance - Remote engine start system (dealer option) - Starting and operating - Subaru Legacy Owners ManualSubaru Legacy: System maintenance

NOTE

In the event that the vehicle’s battery is replaced, discharged or disconnected, it will be necessary to start the vehicle a minimum of one time using the key prior to activating the remote engine start system. This is required to allow the vehicle electronic systems to resynchronize.

Remote transmitter program
New transmitters can be programmed to the remote engine start system in the event that a transmitter is lost, stolen, damaged or additional transmitters are desired (the system will accept up to e ...

Changing the batteries
CAUTION ● Do not let dust, oil or water get on or in the remote engine start transmitter when replacing the battery. ● Be careful not to damage the printed circuit board in the remote ...

See also:

Instrument panel
1) Door locks (page 2-4) 2) Electronic parking brake switch (page 7-34) 3) Hill Holder switch (page 7-36) 4) Trunk lid opener switch (page 2-24) 5) Vehicle Dynamics Control OFF switch (page 7-31 ...

Rapid air pressure loss
Rapid air pressure loss or a “blow-out” can occur if the tire is punctured or is damaged due to hitting a curb or pothole. Rapid air pressure loss can also be caused by driving on under-inflate ...

Instrument Panel Illumination Control
Instrument Panel Illumination Control The brightness of the instrument panel lighting and steering wheel controls can be adjusted. (Instrument Panel Illumination): Move and hold the thumb ...