Mercedes-Benz E-Class: System self-test - mbrace - Features - Stowing and features - Mercedes-Benz E-Class Owners ManualMercedes-Benz E-Class: System self-test

After you have switched on the ignition, the system carries out a self-diagnosis.

WARNING
A malfunction in the system has been detected if one of the following conditions occurs:

 - the indicator lamp in the SOS button does not light up during the system selfdiagnosis.

 - the indicator lamp in the Roadside Roadside Assistance button does not light up during the system self-diagnosis.

 - The indicator lamp in the information information button does not light up during selfdiagnosis of the system.

 - the indicator lamp in the SOS button, Roadside Assistance button or information button continues to be lit red information button continues to be lit red after the system self-diagnosis.

 - The Tele Aid Inoperative or Tele Aid Not Activated message appears in the multifunction display after the system selftest.

If a malfunction is indicated as outlined above, the system may not operate as expected. In the event of an emergency, assistance must be summoned by other means.

Have the system checked at the nearest authorized Mercedes-Benz Center or contact the following service hotlines:

 - USA: Mercedes-Benz Customer Assistance Center under 1-800-FOR-MERCedes(1-800-367-6372) or 1-888-990-9007

 - Canada: Customer Service at 1-888-923-83

    The mbrace system
    The mbrace system provides different services, e.g.:  - automatic and manual emergency call  - Roadside Assistance call  - MB Info call To adjust the volume during an mbrace ...

    Emergency call
    Important safety notes ! A license agreement must exist in order to activate the mbrace service. Ensure that your system is activated and ready for use, and press the MB Info call button to ...

    See also:

    Canceling a Remote Start
    To cancel a remote start, do any of the following: • Aim the RKE transmitter at the vehicle and press and hold until the parking lamps turn off. • Turn on the hazard warning flashers. ...

    Behavior with key lock-in prevention function non-operational
    ● If the lock lever is turned to the rear (“LOCK”) position with the driver’s door open and the driver’s door is then closed with the lock lever in that position, the driver’s door ...

    Before changing a fuse
    •► Park the vehicle and apply the parking brake. •► Switch off all electrical consumers. •► Remove the SmartKey from the ignition lock. The fuses are located in various ...