Subaru Legacy: Tilting moonroof
1) Raise
2) Lower
The raising function will only operate when the moonroof is fully closed. The lowering function will only operate when the moonroof is raised.
Press the rear side of the “UP/DOWN” switch to raise the moonroof. Press the front side of the “UP/DOWN” switch to lower the moonroof.
Release the switch after the moonroof has been raised or has been lowered completely. Pressing the switch continuously may cause damage to the moonroof.
NOTE
One-touch operation does not take place when the moonroof is lowered. Press the switch continuously to lower the moonroof.
Sliding moonroof
1) Open 2) Close Press the “OPEN/CLOSE” switch rearward to open the moonroof. The sun shade will also be opened together with the moonroof. For Outback, the moonroof will stop at a position ...See also:
Coolant
The coolant should be changed at the intervals specified in the maintenance schedule. ...
Tail/Back-up light (Outback)
1. Apply a flat-head screwdriver to the light cover as shown in the illustration,
and pry the light cover off from the rear gate trim.
1) Back-up light
2) Tail light
2. Turn the bulb socket c ...
To Exit Remote Start Mode And Drive The Vehicle
Before the end of the 15 minute cycle, press and release
the UNLOCK button on the RKE transmitter to unlock
the doors and disarm the Vehicle Security Alarm (if
equipped). Then insert the key int ...