Subaru Legacy: Trailer safety chains - Connecting a trailer - Trailer towing - Driving tips - Subaru Legacy Owners ManualSubaru Legacy: Trailer safety chains

WARNING

Always use safety chains between your vehicle and the trailer. Towing trailer without safety chains could create a traffic safety hazard if the trailer separates from the hitch due to coupling damage or hitch ball damage.

In case the trailer hitch connector or hitch ball should break or become disconnected, the trailer could get loose and create a traffic safety hazard. For safety, always connect the towing vehicle and trailer with trailer safety chains. Pass the chains crossing each other under the trailer tongue to prevent the trailer from dropping onto the ground in case the trailer tongue should disconnect from the hitch ball. Allow sufficient slack in the chains taking tight turn situations into account; however, be careful not to let them drag on the ground. For more information about the safety chain connection, refer to the instructions for your hitch and trailer.

    Trailer brakes
    WARNING ● Adequate size trailer brakes are required when the trailer and its cargo exceed 1,000 lbs (453 kg) total weight. ● Do not directly connect your trailer’s hydraulic brake sy ...

    Side mirrors
    After hitching a trailer to your vehicle, check that the standard side mirrors provide a good rearward field of view without significant blind spots. If significant blind spots occur with the ve ...

    See also:

    Important safety notes
    WARNING If the vehicle becomes trapped in snow, ensure that snow is kept away from the exhaust pipe and from around the vehicle as long as the engine is running. Otherwise, poisonous carb ...

    Forward-facing child restraint installation using latch
    Refer to all Warnings and Cautions in the Child Safety and Child Restraint sections before installing a child restraint. Follow these steps to install a forward-facing child restraint using the Lat ...

    Active seat ventilation, front
    The seat cushion and backrest surfaces are cooled by means of integrated fans. The ventilation rapidly cools the seat, e. g., if the vehicle interior is overheated or for continuous cooling at ...