Subaru Legacy: Trunk light (Legacy) - Replacing bulbs - Maintenance and service - Subaru Legacy Owners ManualSubaru Legacy: Trunk light (Legacy)

1. Push both sides of the light cover, and then remove the cover by pulling it

1. Push both sides of the light cover, and then remove the cover by pulling it out.

2. Pull the bulb out of the socket.

3. Install a new bulb.

4. Reinstall the cover.

    Cargo area light (Outback)
    1. Remove the lens by prying the edge of the lens with a flat-head screwdriver. 2. Pull the bulb out of the socket. 3. Install a new bulb. 4. Reinstall the lens. ...

    Other bulbs
    Other bulbs may be difficult to replace. We recommend that you have the bulbs replaced by your SUBARU dealer if necessary. ...

    See also:

    At a glance
    The concept Mobile phones or other external devices such as audio players can be connected to the vehicle via Bluetooth. After these devices are paired once, they are recognized automatically ...

    Determining compatibility of tire and vehicle load capacities
    The sum of four tires’ maximum load ratings must exceed the maximum loaded vehicle weight (“GVWR”). In addition, sum of the maximum load ratings of two front tires and of two rear tires must ...

    Temporary Spare
    A spare tire can be purchased for your vehicle as an accessory. Follow the instructions included with the spare tire regarding use and stowing in the vehicle. See also page 290 for additional info ...