Volvo S60: Using the information button
1. Press the information button
2. All of the indicator lights will flash sequentially for approximately 7 seconds to indicate that the PCC is receiving information from the vehicle. If any of the buttons are pressed during this 7-second period, transmission of information to the PCC will be interrupted.
NOTE
If none of the indicator lights flash when the information button has been pressed several times from different places in relation to the vehicle, contact an authorized Volvo service technician.
The indicator lights provide information according to the illustration:
1 - Steady green light: the vehicle is correctly locked.
2 - Steady yellow
light: the vehicle is not locked.
3 - Steady red light: the alarm has been triggered.
4 - Both red lights flash alternatively: the alarm was triggered less than 5 minutes
ago.
Unique functions—PCC*
1 - Information button 2 - Indicator lights Pressing the information button provides certain information about the vehicle with the help of the indicator lights. ...Range
The PCC's lock and unlock functions have a range of approximately 60 ft. (20 m) from the vehicle. NOTE The approach lighting, panic alarm, and the functions controlled by the inform ...See also:
Special Additives
Automatic Transmission Fluid (ATF) is an engineered
product and its performance may be impaired by supplemental
additives. Therefore, do not add any fluid additives
to the transmission. The only ...
Changing the batteries
CAUTION
● Do not let dust, oil or water get on or in the remote engine start transmitter
when replacing the battery.
● Be careful not to damage the printed circuit board in the remote ...
Jump starting
To start your engine with a booster battery, the
instructions and precautions below must be followed.
WARNING
● If done incorrectly, jump starting can
lead to a battery explosion, resulting ...