Subaru Legacy: Vehicle Dynamics Control warning light - Vehicle Dynamics Control warning light/Vehicle Dynamics Control operation indicator 
light - Warning and indicator lights - Instruments and controls - Subaru Legacy Owners ManualSubaru Legacy: Vehicle Dynamics Control warning light

CAUTION

The Vehicle Dynamics Control system provides its ABS control through the electrical circuit of the ABS system. Accordingly, if the ABS is inoperative, the Vehicle Dynamics Control system becomes unable to provide ABS control. As a result, the Vehicle Dynamics Control system also becomes inoperative, causing the warning light to illuminate. Though both the Vehicle Dynamics Control and ABS systems are inoperative in this case, the ordinary functions of the brake system are still available. You will be safe while driving with this condition, but drive carefully and have your vehicle checked at a SUBARU dealer as soon as possible.

NOTE

● If the electrical circuit of the Vehicle Dynamics Control system itself malfunctions, the warning light only illuminates. At this time, the ABS (Anti-lock Brake System) remains fully operational.
● The warning light illuminates when the electronic control system of the ABS/Vehicle Dynamics Control system malfunctions.
The Vehicle Dynamics Control system is probably inoperative under any of the following conditions. Have your vehicle checked at a SUBARU dealer immediately.
● The warning light does not illuminate when the ignition switch is turned to the “ON” position.
● The warning light illuminates while the vehicle is running.

NOTE

If the warning light behavior is as described in the following examples, the Vehicle Dynamics Control system may be considered normal.

● The warning light illuminates right after the engine is started but turns off immediately, remaining off.
● The warning light illuminates after the engine has started and turns off while the vehicle is subsequently being driven.
● The warning light illuminates during driving, but it turns off immediately and remains off.

    Vehicle Dynamics Control warning light/Vehicle Dynamics Control operation indicator light
    The light illuminates when the ignition switch is turned to the “ON” position and turns off several seconds after the engine has started. This lighting pattern indicates that the Vehicle Dynam ...

    Vehicle Dynamics Control operation indicator light
    The indicator light flashes during activation of the skid suppression function and during activation of the traction control function. NOTE ● The light may remain illuminated for a short per ...

    See also:

    Exterior Lamp Controls
    The exterior lamp control is located on the instrument panel on the outboard side of the steering wheel. Turn the control to the following positions: (Off): Turns off the exterior lamps. The ...

    Adaptive brake assistant
    In combination with the Active Cruise Control, this system ensures that the brakes respond even more rapidly when braking in critical situations. Refer also to Collision warning ...

    Headlight housing
    The entire headlight housing must be lifted out when replacing all front bulbs. CAUTION Never touch the glass of bulbs with your fingers. Grease and oils from your fingers vaporize in the heat ...