Chrysler 200: Without The Ignition Key - Towing A Disabled Vehicle - What to do in emergencies - Chrysler 200 Owners ManualChrysler 200: Without The Ignition Key

Special care must be taken when the vehicle is towed with the ignition in the LOCK position. Flatbed towing is the preferred towing method. However, if a flatbed towing vehicle is not available, wheel lift towing equipment may be used. Rear towing (with the front wheels on the ground) is not allowed, as transmission damage will occur. If rear towing is the only alternative, the front wheels must be placed on a towing dolly. Proper towing equipment is necessary to prevent damage to the vehicle.

CAUTION!
Failure to follow these towing methods can cause severe damage to the transmission. Such damage is not covered by the New Vehicle Limited Warranty.

    Dual Dry Clutch (6-Speed C635 Ddct) Automatic Transmission
    This vehicle must be towed with the front wheels OFF the ground (using a flatbed truck, towing dolly, or wheel lift equipment with the front wheels raised). The manufacturer recommends towing yo ...

    See also:

    Tire pressure monitoring system (TPMS)
    Each tire, including the spare (if provided), should be checked monthly when cold and inflated to the inflation pressure recommended by the vehicle manufacturer on the vehicle placard or tire infl ...

    Seat belts
    The seat belts can be cleaned by wiping them with a sponge dampened in a mild soap solution. Allow the belts to dry completely in the shade before using them. See “Seat belt maintenance” in th ...

    High-beam headlamps
    •► To switch on the high-beam headlamps: turn the SmartKey in the ignition lock to position 2 or start the engine. •► Turn the light switch to or . •► Press the combin ...