Tire and loading information label

The cold tire pressure is shown on the Tire and Loading Information label. The label is located as shown. ...

Installing front license plate

Use the following steps to mount the front license plate: (1) Make holes on the plastic finisher at the location mark (small dimple) using a 0.31 in (8 mm) drill. Apply light pressure to the dril ...

See also:

Using the Store Command
The store command allows a phone number to be stored without entering the digits individually. 1. Press . ► For vehicles without a navigation system, the system responds “Ready,” followed ...

To arm the system using remote transmitter
1. Close all windows and the moonroof (if equipped). 2. Remove the key from the ignition switch. 3. Open the doors and get out of the vehicle. 4. Make sure that the engine hood (and the trunk lid ( ...

Synthetic oil
You should use synthetic engine oil that meets the same requirements given for conventional engine oil. When using synthetic oil, you must use oil of the same classification, viscosity and grade s ...