Ford Fusion: Checking the wiper blades - Wipers and washers - Ford Fusion Owners manualFord Fusion: Checking the wiper blades

Run the tip of your fingers over the edgeof the blade to check for roughness.

Checking the wiper blades

Run the tip of your fingers over the edgeof the blade to check for roughness.

Clean the wiper blade lips with waterapplied with a soft sponge.

    Adjusting the windscreen washer jets
    Adjusting the windscreen washer jets The eye ball jets can be adjusted preciselyusing a pin. ...

    Changing the wiper blades
    Changing the wiper blades Lift the wiper arm and position the wiperblade at a right angle to the wiper arm. Toremove, press the retaining clip in thedirection of the arrow, disengage thewiper blade a ...

    See also:

    Moonroof (if equipped)
    WARNING Never let anyone’s hands, arms, head or any objects protrude from the moonroof. A person could be seriously injured if the vehicle stops suddenly or turns sharply or if the vehicle is i ...

    License plate lighting
    1. Remove the screws with a screwdriver. 2. Carefully detach the entire bulb housing and pull it out. 3. Replace the bulb. 4. Reinsert the entire bulb housing and tighten the screws. ...

    Engine Compartment Fuse Block
    To remove the fuse block cover, press the three retaining clips on the cover and lift it straight up. Notice: Spilling liquid on any electrical component on the vehicle may damage it. Always keep t ...