Ford Fusion: Changing the wiper blades - Wipers and washers - Ford Fusion Owners manualFord Fusion: Changing the wiper blades

Lift the wiper arm and position the wiperblade at a right angle to the wiper arm. Toremove, press the retaining clip in thedirection of the arrow, disengage thewiper blade and pull it off the arm in theopposite direction.

Changing the wiper blades

Lift the wiper arm and position the wiperblade at a right angle to the wiper arm. Toremove, press the retaining clip in thedirection of the arrow, disengage thewiper blade and pull it off the arm in theopposite direction.

    Checking the wiper blades
    Checking the wiper blades Run the tip of your fingers over the edgeof the blade to check for roughness. Clean the wiper blade lips with waterapplied with a soft sponge. ...

    Lighting
    ...

    See also:

    Center console box (front)
    If you remove the divider plate from the dual cup holders, you can use the center console box as a storage space. To use as storage space: Pull out the divider plate of the dual cup holder. T ...

    Rear view camera (if equipped)
    Legacy Outback A rear view camera is attached to the trunk lid (Legacy) or rear gate (Outback). When the ignition switch is “ON” and the shift lever (MT models) or select lever (AT or CV ...

    Warning and display messages in the multifunction display
    •► Activate ATTENTION ASSIST using the onboard computer Symbol 1 appears in the multifunction display. If ATTENTION ASSIST is active, you will be warned no sooner than 20 minutes aft ...